Tracker Safe - LED Light Kit with Motion Sensor (LK-5000)
The Tracker Safe motion activated LK-5000 LED light kit is the perfect way to light up your safe. The kit comes with five (5) individual foot (12") long wands. Each wand is equipped with 18 super bright 5000K temperature LEDs that really light up the darkest of safe interiors. The motion sensor detects motion when you open the door of your gun safe and turns off automatically after 1 minute if no movement is detected.
Now includes a battery box power supply. It can be used with 8 AA batteries or with the 12V AC power supply plug in.
The LED light wands and motion sensor have pre-installed Velcro (hook side) so that they can be easily attached to the interior carpet of most safes. They can also be attached with the supplied screws or the supplied Velcro (loop side) strips.
The LED wands all connect in series (ie. Daisy Chain) wrapping from one side (2 wands), up and around the top (1 wand) and down the other side (2 wands) of the safe. This really floods the safe with consistently bright light.
LED Light Wands:
- 18 LEDs per Light Wand (11.875 inches)
- 5000K Temperature LEDs (Bright White Light)
- Pre-Installed 3M Adhesive Velcro (Hook Side) to two sides of the LED light housing. For easy installation purposes.
- Auto-On with motion is detected
- Turns off after 1 minute if no motion is detected
- Maximum angle of the sensor is 120 degrees
- Maximum distance of the sensor is 26 feet
- LED Light Wands (Qty: 5)
- Motion Sensor (Qty: 1)
- 12V AC Power Supply (Qty: 1)
- Battery Box Power Supply - 8 AA Batteries (Qty: 1)
- 15.25 Inch Cable Extensions (Qty: 3)
- 10.5 Inch Cable Extensions (Qty: 2)
- Cable Management Clips (Qty: 10)
- 3M Adhesive Velcro for Wire Clips: (Qty: 10 sets)
- Mounting Screws (if needed) (Qty: 12)
- 3M Adhesive Velcro stips for LED Wands (if needed) (Qty: 5)
- Packaged Weight: 1lb 1oz